Tuesday, October 07, 2008

 

Framers on site

The main ridge board goes up with the help of the Genie Lift. You can see that it's been raining, of course.

Rafter calculations being made.
The first rafter goes up.


The fabricated connector for the secondary ridge and valley rafters goes up. All of the ridges and valleys are LVLs. The rafters are 2x8.




The end of day one. There was little done on the gable side of the roof, and that will take more time. We're leaving the plates off of the gables until the rafters are mostly complete.




Comments:
This comment has been removed by the author.
 
Post a Comment

<< Home

This page is powered by Blogger. Isn't yours?