Monday, June 09, 2008

 

Block placement

Here's a box of the fabricated pieces.
I used a 16d nail to punch two holes in each side for using drywall screws to attach to the form boards.
The block is first placed on wood supports (a little thicker than the CFS track that we're using.)
Then the CFS track is inserted at the "nodes". The placement insures that they supports won't interfere with the later placement of the vertical rebar that has to come up through the block.
Posted by Picasa

Comments: Post a Comment

<< Home

This page is powered by Blogger. Isn't yours?