Monday, June 09, 2008
Block jigs
Here's two jigs I made, one 45 degree and one 90 degree. The 45 has aluminum countertop trim on the edges to make it last for the several hundred 45 cuts I'll need to make. The 90 degree didn't work out to be so straight. I think I can probably eyeball a straighter cut. I'm using an old cross0cut hand saw. Takes about 20 seconds a cut and less noise and dust than the "normal" electric chainsaw.
Comments:
<< Home
Dear Mark:
Great set of pictures! We are the manufacturer of Fastfoot®, and I am wondering if we could use some of your pictures for a project page on our website?
Send me an email if you have time to richard.fearn@fab-form.com, and good luck with your project.
Sincerely,
Rick
Post a Comment
Great set of pictures! We are the manufacturer of Fastfoot®, and I am wondering if we could use some of your pictures for a project page on our website?
Send me an email if you have time to richard.fearn@fab-form.com, and good luck with your project.
Sincerely,
Rick
<< Home